||Pure and clean water is essential for human health. Tap water is usually polluted, impure and unfit for drinking purposes. It carries germs for cholera, Typhoid, Hepatitis-B, Hepatitis-C and many other fatal diseases involving liver, stomach and kidney. Drinking not only should look clean but is has to be pure too.
AQUA CARE Water Filter is installed directly to your tap and possesses a modern Pure water purification filter technology which makes the quality and the taste of your drinking water much better by catching and removing chemical chlorine side products, trihalomethanes, benzene, MTBE, chlorine, atrazine, lead, and mercury. Carbon filter, contained in faucet water filters, help to remove practically most of bacteria which get into your water, ensuring you’re consuming safe and healthy drinking supply.
2 gallon per minute output
99.99% reduction of bacteria and viruses
1 micron sediment pre-filter
CBC-10 carbon block filter
Easy installation and compact design
Unit includes an attractive long reach faucet, feed adapter, and spanner wrench
0.35 micron sediment filter on UVR-4
How does the Ultra Violet Light kill the bacteria?
The Ultra Violet light ray penetrates the outer membrane of the bacteria, viruses, yeast, mold and algae, and it destroys the DNA that is responsible for the reproduction and survival of the organisms.
Safer, healthier water has never been easier.
The high germicidal output assures 99.99% reduction of bacteria and viruses…without leaving any harmful residues in the treated water. The design of the UVR series makes it very manageable for installation and maintenance. Only a small screwdriver is required for annual lamp replacement.
Stage 1 includes a 5-Micron pleated pre-sediment filter which helps protect your new Propur® filtration system from sediments commonly found in aging water supply pipes. Reduces damaging effects of sediment such as dirt, sand, debris and rust. Ideal for use with most city or well water.
The Propur Dual Stage Under Counter Water Filter System is designed to be installed with a separate faucet (included).
Enjoy Propurified® water when you want it!
System features include:
• Dual stage design
• Premium quality housing and fittings
• Mounting bracket, 3/8” quick connect fittings, 6’ pc of polyethylene 3/8” tubing, wrench and chrome plated lead free faucet kit included
• 5-micron pre-sediment and ProMax™ “all-in-one” water filter elements
• ABS plastic housing - BPA & BPS free
• No electricity required
• Easy to replace filter elements
• Overall size is 11.25”x 4.75”x 13.25”
• Replacement Filters: PMC-34RF (ProMax) & PSD-1005 (Pre-sediment)
||Whole House – also known as Point-of-Entry (POE) – systems connect to the water supply where it enters the house. This allows all of the water used throughout your home to be treated, including water used in your kitchen, bathrooms and laundry.
If you have a water quality issue affecting all areas of your home, then a Whole House (POE) filtration and/or treatment solutions would be the best choice for you. POE systems are capable of treating much more water than Point-of-Use (POU) systems, making them the ideal choice for homes affected by:
•Hard water – While quite healthy to drink, hard water can cause scale buildup in pipes and on fixtures, interfere with the effectiveness of soap (laundry and bath), and shorten the life of appliances such as dishwashers and hot water heaters.
•Heavy sediment in the water – A POE system helps prevent sediment from damaging hot water heaters, plumbing systems, soiling laundry or dishes, or adversely affecting drinking and cooking water.
•Special contaminants such as iron, lead, bacteria and viruses – A POE device allows you to treat your specific concerns directly, for example with a filter designed to remove iron, lead (from the home’s plumbing and pipes) or chlorine residue (if the water is disinfected), or with an filtration system that reduces bacteria and viruses.
Note that POE systems are generally designed to treat water before it enters your hot water heater, so both hot and cold water is treated. Any water taps leading to the outside of your home, like those supplying garden hoses or sprinkler systems, would not pass through the POE systems thus remain untreated.
We are pleased to offer a wide selection of whole house water filters designed specifically to meet the higher water flow rates encountered on a home’s main incoming water line. In addition to offering basic systems designed to remove sediment, dirt, and rust particles, we also offer a complete range of whole house water filter packages for the removal of chlorine, chloramine, cysts, VOC’s, iron, hydrogen sulfide (rotten egg smell), certain heavy metals, and a wide range of contaminants responsible for bad taste and odors in residential water supplies. We also manufacture UV which are designed specifically to sterilize residential water to kill bacteria and viruses.
Our whole house systems are designed for high flow rate applications, however, it is always important to note that as with all water treatment applications, the faster you flow water through the system (higher flow rate), the less effective the filter will be. To help you select a system that will provide you with the best possible contaminant removal rates, please note the maximum flow rates specified for each system and select a model that suits your maximum flow rate needs in your home.